Swivel Fill Limit Valves for Aluminum Tanks

Product Description
    • Machined Aluminum
    • Blue Polymer Valve
    • Standard ullage depths range from 3/8" to 1-1/2"
    • FLVs are used to establish ullage (airspace) in the tank and help prevent overfilling.
    • Perko's FLVs connect to 5/8" hose. They are designed to vent to vented fuel fills and not directly to canisters.
    • Mounting options for tank mounted FLVs include flanged (for plastic tanks), threaded or welded (for metal tanks) and swivel (for both plastic and metal tanks).
    • Flanged valves match the SAE 5-bolt level sender flange. Gasket is not included.
    • Swivel valves include valves, valve housing, o-ring, snap ring and tank insert.
    • Distant sensing (DFLV) versions are available for both plastic and metal tanks on a custom basis.
    • Custom ullage set points are available. Contact the factory for details.
Technical Information
  • For use in aluminum tanks
  • Angle/Port: 90°
  • Fire Test Capable: Yes
  • Collar: No
  • Width Inches: 2"
  • Projection Inches: 1-1/4"
  • Mounting Hole Diameter: 1-3/4"
  • Hose Connection: 5/8"
  • Flow > 70 l/min @ 0.25 kPa
  • Flow without corking > 130 l/min
  • Minimum reopening pressure: 0.5 kPa
Ordering Information
Catalog No. Ullage Depth Inches Length Inches Shipping Weight Lbs.
0586S0A038 3/8 3-23/32 4.0
0586S0A034 3/4 4-3/32 4.2
0586S0A118 1-1/8 4-15/32 4.8
0586S0A112 1-1/2 4-27/32 5.5
Product Notes
NOTE: Longer shut-off heights in 1/2" increments are generally available up to 5-1/2". For custom heights, contact the factory.

No Saved Products